The collection / Fumo
Epic
Epic builds on Revolution with a diamond tweeter and an edge-driven CID midrange. Every driver and crossover is matched by hand. Valerio or Sheree personally evaluates every pair.
One voice in a hall
Revolution grew out of the thrill of hearing a whole band come in behind a soloist. With Epic, we gave ourselves the freedom to follow that idea wherever listening took us. We chose each component on its musical merits, without designing to a price point.
Picture a singer standing a few steps in front of an orchestra. She sings the last line so quietly you lean in to catch the words. Then her voice stops. For a moment the hall carries the vowel she has just sung, and you can hear how far that sound has travelled. Those few seconds ask as much of a loudspeaker as the full orchestra did a moment before.
Where one driver leaves off
Epic’s diamond tweeter was chosen for its ability to resolve that last trace of sound. Beneath it, an edge-driven CID midrange uses a six-inch voice coil at the edge of the diaphragm. Three dedicated bass drivers give the lower registers their weight. The test for us is a human voice moving through its range. As the singer climbs from a low, intimate phrase to a ringing upper note, you should be able to close your eyes and point to the same person standing in the same place.
The final listen
We hand-select and hand-match the capacitors, then hand-match every other crossover component. We match the completed crossovers to one another and hand-match the drivers for each pair of loudspeakers. A part earns its place by how well it works with the next. Both speakers have to agree closely enough to give that singer a place between them.
Sheree and I share the final listening. After all the choices at the workbench, I come back to the simplest one I know. I put on a voice I love and listen to the end of the phrase. If I find myself waiting for what she’s going to sing next, I know what all that care was for.
Valerio Renato Cora
Standard finish and hardware
The cabinet is hand-assembled from 20 mm natural granite in Fumo, RENATO DESIGN’s leathered charcoal finish. We join the stone panels with 45-degree miters to give the drivers a stable foundation. Polished outriggers. Rear terminal plate.
Every RENATO loudspeaker is handmade with love. Before a pair leaves our workshop, one of us, Valerio or Sheree, listens to it and gives it our family’s approval. It goes from our family to yours only when it meets our exacting standards.
Epic at a glance
- Design
- Three-way floorstander
- Driver complement
- Three 220 mm bass drivers, one 168 mm edge-driven midrange and one 25 mm diamond tweeter
- Cabinet dimensions (H × W × D)
- 1322 × 294 × 652 mm
52.05 × 11.57 × 25.67 in
Depth at the base is shown above. Top depth is 571 mm (22.48 in). - Approximate weight per loudspeaker
- 149–155 kg (328–342 lb)
- Net bass volume
- 177 L design target
- Estimated frequency response · standard
- 25 Hz–40 kHz (±2 dB)
- Estimated frequency response · in room
- 22 Hz–40 kHz (±2 dB)
- In-room bass extension · −6 dB design target
- Approx. 18 Hz
- Illustrated listening room
- 24 × 32 ft · 7.3 × 9.8 m
Cabinet dimensions exclude the feet and outriggers. Weight is an assembled design estimate and varies with the stone. Frequency ranges are preliminary design targets. In-room bass assumes modest reinforcement in the illustrated room and will vary with placement and listening position.
Design visualization. Stone color, veining and hardware details in the render may differ from the standard specification above.
Listen through a RENATO dealer.
RENATO is a loudspeaker manufacturer. We work exclusively with qualified, professional dealers. Your RENATO dealer can arrange a demonstration and advise on model selection, placement, system matching, finishes and availability.
Dealer information Listening through a dealer